59 c0 ошибка выкл вкл устройства

I know it’s late hope it’ll help for the others.

It’s caused by so called sticky solenoid which seat behind formatter, ADF……

Not so easy to get to it. You need to take out ADF,left,right,upper case…. first.

http://westhillprinters.blogspot.com/2011/12/sticky-solenoids.html

It controls black color and the other three colors (at the same time)to work with each other.

But because of sticky problem you got 59.C0 error.

What you need to do is to resolve the sticky solenoid issue.

Not an easy job to do but it’s not so difficult either.

No need to really take apart everything before you to get to it .

What you really need to do is making a piece of V shape of paper its dimention maybe is 0.3 * 1.2 cm.

And find some ways to insert it into and between the solenoid’s two metals to prevent the sticky issues happens again.

It will always has a small hole between gears and plastics. Find it out and insert the V shape paper into it.

After done that you will be fine.

Find it out where the solenoid is and there’s no need to get it out from the machine you just need to find a way (or a hole, a gap) to try to insert a V-shape paper into between that two metals to keep them from stick together again. It always works.

You need a thin paper don’t make it too thick!

Check here on youtube, not same models but same problems.

Hp CLJ CP3525 CP3530 59.F0 disassembly

[edit]

HP LASER JET COLOR CM1415FN ERRO 59.c0 PARTE1

[edit]

I know it’s late hope it’ll help for the others.

It’s caused by so called sticky solenoid which seat behind formatter, ADF……

Not so easy to get to it. You need to take out ADF,left,right,upper case…. first.

http://westhillprinters.blogspot.com/2011/12/sticky-solenoids.html

It controls black color and the other three colors (at the same time)to work with each other.

But because of sticky problem you got 59.C0 error.

What you need to do is to resolve the sticky solenoid issue.

Not an easy job to do but it’s not so difficult either.

No need to really take apart everything before you to get to it .

What you really need to do is making a piece of V shape of paper its dimention maybe is 0.3 * 1.2 cm.

And find some ways to insert it into and between the solenoid’s two metals to prevent the sticky issues happens again.

It will always has a small hole between gears and plastics. Find it out and insert the V shape paper into it.

After done that you will be fine.

Find it out where the solenoid is and there’s no need to get it out from the machine you just need to find a way (or a hole, a gap) to try to insert a V-shape paper into between that two metals to keep them from stick together again. It always works.

You need a thin paper don’t make it too thick!

Check here on youtube, not same models but same problems.

Hp CLJ CP3525 CP3530 59.F0 disassembly

[edit]

HP LASER JET COLOR CM1415FN ERRO 59.c0 PARTE1

[edit]

Принтер или МФУ HP CLJ Pro M377 / M452 / M477 и другие модели выдают ошибку 59.F0 или 59.C0 выкл. и вкл. Устройство. Давайте разберемся в проблеме. Данная ошибка возникает после определенного пробега устройства. Ошибки в датчиках или по другому в концевиках. Ошибка 59.F0 означает что неисправна лента переноса, но если лента не прошла свой ресурс заявленным производителем, то какой смысл ее менять, да и к тому же это не дешевое удовольствие.

Модератор: vetal

Вернуться в Принтеры, МФУ, факсы, копиры формата A4

Кто сейчас на форуме

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 31

Если это сообщение появится снова, обратитесь в службу технической поддержки HP.

Ошибка 55.X Выкл. и вкл. устр-во

Описание

В продукте произошла внутренняя ошибка оборудования.

Рекомендуемое действие

Выключите продукт, подождите как минимум 30 секунд, включите продукт и дождитесь
инициализации.

Если применяется устройство защиты от перенапряжения, отключите его. Подключите продукт
к штепсельной розетке напрямую. Включите продукт.

Если это сообщение появится снова, обратитесь в службу технической поддержки HP.

Ошибка 59.X Выкл. и вкл. устр-во

Описание

В продукте произошла ошибка, связанная с работой одного из двигателей.

Рекомендуемое действие

Выключите продукт, подождите как минимум 30 секунд, включите продукт и дождитесь
инициализации.

Если применяется устройство защиты от перенапряжения, отключите его. Подключите продукт
к штепсельной розетке напрямую. Включите продукт.

Если это сообщение появится снова, обратитесь в службу технической поддержки HP.

Ошибка 79 Выкл. и вкл. устр-во

Описание

В продукте произошла внутренняя ошибка оборудования.

Рекомендуемое действие

Выключите продукт, подождите как минимум 30 секунд, включите продукт и дождитесь
инициализации.

Если применяется устройство защиты от перенапряжения, отключите его. Подключите продукт
к штепсельной розетке напрямую. Включите продукт.

Если это сообщение появится снова, обратитесь в службу технической поддержки HP.

Ошибка печати Нажмите [OK]

Описание

Задержка при прохождении бумаги через устройство.

164

Глава 11 Решение проблем

RUWW

Hi community,

59 error could be a bad motor or Developer motor rotation error. Remove all toner, power cycle the printer, and re-install one at a time, closing the access door each time before inserting another. See if one of the supplies seems to trigger the error.

You can update your drivers: HP Customer Support — Software and Driver Downloads 

If the issue still persists, for the next course of action, please create a new post in our community: New message. 

Thanks,

Agatha
I work on behalf of HP

Модератор: vetal

Вернуться в Принтеры, МФУ, факсы, копиры формата A4

Кто сейчас на форуме

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 83

It’s a common issue for CP1525nw to act like that and it’s all coming from so called Sticky Solenoids problem.

If you let CP1525 turn all on its way you will hear its engine rotates as usual like it will grab paper and print but then it pauses for a while ,again it rorates and pauses…… and so on like it will go on and go on like it will never stop. But if you let it be there all on its own way it will end up showing 59.C0/59.F0.

http://westhillprinters.blogspot.com/2011/12/sticky-solenoids.html

There’re two solenoids in CP1525 which one for iTB and the other is for pick-up roller. The iTB one seats at upper right conner of the machine and the other is at the bottom right sidt of CP1525. Both of them hide deeply and not not easily to be got to. And there’s no other way to fix such problem but to take apart the machine and take really care of it.

The best thing is if you do it right you will only have to do that only one time and it will never happen twice. 

You will need the Service Manual with you just google it.

What myself really have done many times’s experience is never really trying to take everything apart to get to the solenoid  if you really do so you will be ended up with failing easily. What you really have to do is finding out whers the solenoids’s locatation and find a easy way to stop its sticky happened again. What i always did is just putting a V-shape paper into the two matels of the sonenoid to keep them away from sticky again and all will be done.

To get to that you ill have to find out or to make a hole which it can let you to get to the solenoid.

What i posted earlier is here and hope it will help.

The iTB side is:

https://h30434.www3.hp.com/t5/LaserJet-Printing/59-C0-error/m-p/6805514#M351732

https://h30434.www3.hp.com/t5/LaserJet-Printing/HP-LASERJET-PRO-200-COLOR-M276nw-59-C0-error/m-p/677…

Sorry for my poor English to make me hard to describe more clearly.

The last two pictures below are the most inportant thing you really need to do.

The solenoid seats at right inside the hole. Do’nt take everything apart to get to it, it’s a really hard job to do that and it’s more dificult to put everything back into its right place and it’s really to be wrong of somewhere.

Just insert a small V shape paper into the small hole to avoid the sticky solenoid happened again, before doing that it’s better to use a Q-tip with alcohol insert into the small hole to clean up the sticky thing.