Abap runtime error ошибка

Whenever SAP comes across an issue that causes it to stop processing it generates an ABAP Runtime Error. A basic example of this would be a divide by zero but there and many such errors defined in SAP such as DBIF_RSQL_INVALID_REQUEST Invalid Request.

The runtime error would be presented immediately if executing a dialog process but can be recovered any time using transaction ST22. All runtime errors that happen during a background or RFC process are also available via tcode ST22.

The runtime error contains all the details about the type of error as well as the contents of the program variables at the point of the error. for example here is an example of the description you might see for DBIF_RSQL_INVALID_REQUEST.

What Happened? The current ABAP/4 program terminated due to an internal error in the database interface. What can you do? Make a note of the actions and input which caused the error. To resolve the problem contact your system administrator. You can use transaction ST22 (ABAP dump analysis) to view and administer termination messages, especially those beyond their normal deletion date. Error analysis.

In a statement, an invalid request was made to the database interface when accessing the table “EKKO”.

SAP Runtime error transactions and ABAP programs

ST22 –ABAP runtime error
RSLISTDUMPS – List All Runtime Errors and short description
RSSHOWRABAX – Program associated with ST22

SAP Runtime error tables 

SNAP – ABAP/4 Snapshot for Runtime Errors (ST22 list)
SNAPTID – ABAP Runtime Errors – Uses SNAPT as a text table so Includes first text line(TLINE) 
SNAPT – ABAP Runtime Error Texts
SNAPTTREX – Exception table for translation

Runtime Error categories (SNAPTID-CATEGORY)

Field: SNAPTID-CATEGORY
Domain: S380CATEGORY

• I Internal Error
• R Error at ABAP Runtime
• Y Error at Screen Runtime
• D Error in Database Interface
• A ABAP Programming Error
• F Installation Errors
• O Resource Shortage
• E External Error
• U End User Error
• K No Error
• S ST Runtime Error
• J Internal ST Error
• X XSLT Runtime Error& Text Include (no Short Dump, only Text Module)
• & Text Include (no Short Dump, only Text Module)
• B ITS Error
• Q Error in Open SQL
• – Unclassified Error

Most common SAP runtime errors

Below is a list of some of the more common runtime errors including a link to full details of the error and what causes it.

DBIF_RSQL_INVALID_REQUEST

MESSAGE_TYPE_X

TIME_OUT

OPEN_DATASET_NO_AUTHORITY

CONVT_NO_NUMBER

GETWA_NOT_ASSIGNED

TSV_TNEW_PAGE_ALLOC_FAILED

LOAD_PROGRAM_CLASS_MISMATCH

LOAD_PROGRAM_INTF_MISMATCH

• 31 Oct 2013 5:57 am Rohit Mahajan

  Run transaction ST22 to get the details of the error, and find the one for your particular run.
  It will show the program line where the error occurred.
  Find ‘pernr’ to get the employee’s pers.no.
  Then determine the cause of error
  as below:
  a)In transaction SE38 display the program as above. Go to the line where the error occurred,
  b)Set break point just before the line or at the line.
  c)Re-run the payroll for the employee.
  d)When the program stops at the breakpoint, check all the relevant data.
  e)Where required, execute one line at a time, so that you can understand what is happening.

  Then you should be able to find the reason for the error.

  If the problem is in a custom ABAP function, then consult the programmer.

  If the problem is in a SAP program object,
  1)find OSS notes relevant to the problem.
  2)If there are any, apply the notes in the dev.system, import the employee’s data to the dev test client. Repeat the payroll as above and check if the problem is fixed.
  3)If not found, report the error to SAP with an OSS message and all relevant details of data used, transaction, which pay period, expected results, etc.; follow up with SAP for a resolution

When a report or module dumps, the reason is mostly quite obvious. Some runtime errors are «catchable», but when not caught they will stop your report. If you are the user causing the dump, there is a «Debug» button available to you to start the debugger.

This is «Post mortum» debugging — where you know the patient has already died — but having a look around in the debugger can be very useful. Catchable runtime errors are handled with CATCH SYSTEM-EXCEPTIONS using the name of the runtime error. Here’s a list of runtime errors with a brief explanation of what to look out for.

To detect semantically related runtime errors using a common name, they are combined into exception groups. You can handle catchable runtime errors in an ABAP program using the following control statements:

CATCH SYSTEM-EXCEPTIONS exc1 = rc1 ... excn = rcn.
  ...
ENDCATCH.

The expressions exc1 … excn indicate either a catchable runtime error or the name of an exception class. The expressions rc1 … rcn are numeric literals. If one of the specified runtime errors occurs between CATCH and ENDCATCH, the program does not terminate. Instead, the program jumps straight to the ENDCATCH statement. After ENDCATCH, the numeric literal rc1 … rcn that you assigned to the runtime error is contained in the return code field SY-SUBRC. The contents of any fields that occur in the statement in which the error occurred cannot be guaranteed after ENDCATCH.

If you don’t know which exception class to catch, you can use OTHERSto catch all possible catchable runtime errors. Do beware: not all runtime errors are catchable !

CATCH SYSTEM-EXCEPTIONS others = 4.
  ...
ENDCATCH.

Catching the error that would cause a dump — TRY — ENDTRY

One example problem that can not be caught with CATCH SYSTEM-EXCEPTIONSis the example below:

APPEND 'MSGNR = 123' TO options.
APPEND 'ORX' TO options.  "<== ERROR HERE
APPEND 'MSGNR = 124' TO options.
* Dump: SAPSQL_WHERE_PARENTHESES
*       CX_SY_DYNAMIC_OSQL_SYNTAX

CATCH SYSTEM-EXCEPTIONS others = 4. 
  SELECT * FROM t100
    UP TO 1 ROWS
    WHERE (options).
  ENDSELECT.
ENDCATCH. 

The solution for this is the TRY - ENDTRY block, which is a much more precise version of the CATCH SYSTEM-ERRORS. The above example solved:

TRY.
    SELECT * FROM t100
      UP TO 1 ROWS
      WHERE (options).
    ENDSELECT.
  CATCH cx_sy_dynamic_osql_error.
    MESSAGE `Wrong WHERE condition!` TYPE 'I'.
ENDTRY.

The exceptions hierarchy

So which exceptions are available ? And which ones can be caught with CATCH ? Note that exceptions live in exception classes, which adhere to the naming convention CL_CX_*. There’s many examples available through transaction SE24 class builder. Also note that there is a class-hierarchy on the exceptions. The top op the hierarchy is class CX_DYNAMIC_CHECK, below is you could finr e.g. CX_SY_CONVERSION_ERROR and below that the CX_SY_CONVERSION_NO_NUMBER can be found. If you want to specifically catch a number conversion error, the ...NO_NUMBER exception is your candidate of choice. It it’s all possible conversion errors you are interested in catching, the .._ERROR candidate is better, and so on. This example doesn’t care what exception is caught — as long as it is caught:

DATA: lv_char TYPE c LENGTH 50,
      lv_num TYPE n LENGTH 6,
      lo_error_ref TYPE REF TO cx_dynamic_check.

TRY.
    lv_num = 123.
    lv_char = 'Test'.

    lv_num = lv_char. "<= No dump (lv_num = 000000)

    IF lv_num = lv_char. "<= DUMP! - uncatchable !!
    ENDIF.

  CATCH cx_dynamic_check INTO lo_error_ref.
    MESSAGE `Conversion error` TYPE 'I'. "<= Catches nothing...
ENDTRY.

Normally the dump that is produced when a conversion error happened will also state the exception that should/could be used to CATCH it. However, there is an exception — so I found. The IF statement above produces a dump, which can not be caught.

The solution for this is a bit of leg-work. With DESCRIBE FIELD ... TYPE ... the type of the field can be determined. If it is N, the lv_CHAR variable better only contains numbers.

So SAP — why is the conversion done in an IF statement not catchable ?

Легкий способ исправления ошибки “runtime error”

Подробности —> 19.09.2010 89 778204

Ошибку runtime error могут вызвать множество причин и одна из самых распространенных — это установка новых версий программ поверх уже установленных, что приводит к появлению ошибок в системном реестре. Другая распространенная причина — связана с деятельностью различных вирусов, троянов и рекламных шпионов, которые проникают на ваш компьютер и могут удалить, либо модифицировать критически важные файлы вашей операционной системы.

Ошибку runtime error достаточно легко исправить. В 99% случаев, любой чистильщик реестра поможет восстановить удаленные файлы, либо исправить поврежденные. Чистильщики реестра специально разработаны для исправления большинства ошибок, связанных с runtime error, в том числе и runtime error 91, runtime error 13 и многих других, т.к. они проверяют целостность файловой системы.

Скачайте и установите себе программу для чистки реестра, например, CCleaner. Проведите полное сканирование вашего компьютера и найдите причины, которые вызывают ошибку runtime error. В зависимости от количества файлов на вашем компьютере, сканирование может занять время от нескольких минут до получаса. Приятным дополнением будет то, что чистильщик реестра не только исправит ошибки вида runtime error, но и увеличит производительность вашего компьютера.

Источник

SAP ABAP Runtime Errors

Whenever SAP comes across an issue that causes it to stop processing it generates an ABAP Runtime Error. A basic example of this would be a divide by zero but there and many such errors defined in SAP such as DBIF_RSQL_INVALID_REQUEST Invalid Request.

The runtime error would be presented immediately if executing a dialog process but can be recovered any time using transaction ST22. All runtime errors that happen during a background or RFC process are also available via tcode ST22.

The runtime error contains all the details about the type of error as well as the contents of the program variables at the point of the error. for example here is an example of the description you might see for DBIF_RSQL_INVALID_REQUEST.

What Happened? The current ABAP/4 program terminated due to an internal error in the database interface. What can you do? Make a note of the actions and input which caused the error. To resolve the problem contact your system administrator. You can use transaction ST22 (ABAP dump analysis) to view and administer termination messages, especially those beyond their normal deletion date. Error analysis.

In a statement, an invalid request was made to the database interface when accessing the table “EKKO”.

SAP Runtime error transactions and ABAP programs

SAP Runtime error tables

SNAP – ABAP/4 Snapshot for Runtime Errors (ST22 list)
SNAPTID – ABAP Runtime Errors – Uses SNAPT as a text table so Includes first text line(TLINE)
SNAPT – ABAP Runtime Error Texts
SNAPTTREX – Exception table for translation

Runtime Error categories (SNAPTID-CATEGORY)

Field: SNAPTID-CATEGORY
Domain: S380CATEGORY

• I Internal Error
• R Error at ABAP Runtime
• Y Error at Screen Runtime
• D Error in Database Interface
• A ABAP Programming Error
• F Installation Errors
• O Resource Shortage
• E External Error
• U End User Error
• K No Error
• S ST Runtime Error
• J Internal ST Error
• X XSLT Runtime Error& Text Include (no Short Dump, only Text Module)
• & Text Include (no Short Dump, only Text Module)
• B ITS Error
• Q Error in Open SQL
• – Unclassified Error

Most common SAP runtime errors

Below is a list of some of the more common runtime errors including a link to full details of the error and what causes it.

Источник

Блог молодого админа

Увлекательный блог увлеченного айтишника

Ошибка Runtime Error. Как исправить?

Ошибка Runtime Error возникает достаточно часто. Во всяком случае, с ней сталкивается достаточно большое количество пользователей. А возникает она при запуске той или иной программы или игры (помнится, давным-давно при запуске Counter-Strike некоторое время вылетала ошибка Runtime Error 8, пока я ее не исправил). В отличии от многих других ошибок, Runtime Error исправить не так уж сложно, о чем я хочу рассказать вам более подробно.

Причины и решения

Что понять, к какому из действий необходимо прибегнуть для исправления ошибки, надо сначала выяснить, по какой причине она могла возникнуть.

• Скажу сразу, что наиболее популярной причиной, которая встречается в абсолютном большинстве случаев, является обновление программы, либо же ее установка поверх старой версии. Вспомните, если недавно обновили приложении и после этого начала появляться ошибка, значит, проблема именно в обновлении. В этом случае проще всего будет удалить программу полностью с компьютера через «Панель управления», не забыв перенести сохранения, если, например, речь идет об игре. Также я рекомендую очистить реестр от «хвостов», а после этого можно установить программу заново. После этого проблем быть не должно.

• По поводу очистки реестра. Установка обновлений нередко приводит к различным проблемам, возникающим именно в реестре. В принципе, можно попробовать обойтись одной лишь чисткой реестра, не прибегая к удалению программы. Я рекомендую пользоваться такой замечательной программой, как CCleaner. Она распространяется бесплатно (для домашнего пользования) и обладает массой всевозможных функций, одной из который является чистка реестра от поврежденных или проблемных ключей. В принципе, такой же функцией обладают и другие программы, в том числе бесплатные, и по сути нет разницы, чем вы будете пользоваться. Но я все же рекомендую именно CCleaner.

• Допустим, что вы очистили реестр от файлов, а ошибка по-прежнему возникает. Что тогда? Теоретически, возможно проблема кроется во вредоносном файле, который имеется на компьютере. Для его удаление необходимо воспользоваться антивирусом с последними обновлениями, а также утилитой Dr. Web Cureit!, которая отлично справляется с различными троянами и вирусами. Она также бесплатная, скачать ее можно на официальном сайте компании Dr. Web.

• На некоторых форумах пишут, что помогает обновление DirectX. Скачать ее можно на сайте компании Microsoft. Узнать, какая версия утилиты установлена у вас, я уже успел рассказать на страничках сайта.

• Также стоит обратить внимание на текущую версию Visual C++. Для Windows 7 это должна быть Visual C++2010, а для Windows XP — Visual C++2008.

Вот, в общем-то, и все. Эти простые советы должны вам помочь справиться с проблемой, а если этого сделать не получается, напишите мне об этом. Попробуем решить проблему вместе.

Комментарии к записи “ Ошибка Runtime Error. Как исправить? ”

перезагрузил комп. лол, помогло)))

А вот такое как решить. runtime error this application has requested the runtime to terminate

статью почитай хоть…

Добрый день! Не нашла куда вам написать — пишу в комментариях. У меня такая проблема: Я восстанавливала компьютер и мой антивирусник Norton заменился McAfee, который стоял по умолчанию. Нортон не установился (подписка активна до 2017 года), а McAfee я не удалила. Всё — центр поддержки не открывается, приложения не работают — не запускаются: я не могу просмотреть видео, прослушать аудио, не могу отправить письмо в Microsoft, не могу восстановить компьютер, не работает ни одна кнопка. Выдает ошибки Runtime Error и 1719. Скачала CCleaner, почистила — ничего не изменилось. Только в интернете могу посмотреть, а программы скачанные он не все запускает. McAfee не удаляется. Помогите, пожалуйста восстановить компьютер. С уважением Людмила

а че делать, когда устанавливаешь Visual C++2008? мне пишет «./install не является приложением win32»

Потому что у тебя не 64-операционная система, у тебя 32-битная система, из-за этого так пишет

При попытке запуска одной программы выскакивает сообщение:
«Runtime Error!
Program: C:Pr…
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application’s support team for more information.»
Ничего из описанного в этой статье не помогло…
Все другие программы работают как часы. Получается, что прога кривая?

Что делать,если ошибка выдаётся при включении компа,на экране блокировки и после этого чёрный экран,только мышка бегает?

Добрый день, испробовал все, ничего не помогает, поставили мне на пк новую видеокарту GeForce 1050, добавили оперативки до 6гб и переустановили систему, поставили новую 7 на 64, пользуюсь 2 день, не могу поставить моды на wot, вылетает ошибка runtime error (at-1;0), система чистая, вирусов нет, реестр чистил, ошибок нет, помогите пожалуйста разобраться. Заранее огромное спасибо.

Пытаюсь запустить игруху,но выдает ошибка Microsoft Visual C++ runtime libriary runtime error.
Многое перепробовал,но ничто не помогло,кто знает как решить?

Ничего не помогло 🙁

Запустите CMD от имени администратора , после , введите команду : bcdedit.exe /set IncreaseUserVA 2800

Отпишитесь кому помогло

ничего не помогает.Такая ошибка у меня в браузере появляется,а в обычных играх всё норм.

Модем тачмейт перестал работать из-за Runtime Error. Работал-работал и вдруг это. Что делать. На ноуте стоит виста. Он в 2008 г куплен.

База MsSql под деловодством Оптима работала до вчерашнего дня. Со следующего дает при попытке переслать документ ошибку RunTime Error 6. Причем за вчера работает нормально. Переписал на другой Сервер то-же самое. MSSQL-2005. Может у кого такое было.

Как устранить проблему Runtime error?
просто подключайте к пк гарнитуру или колонки и все

Здравствуйте. У меня при запуске игры выдает это:
Error!
Runtime error 112 at 00403FBC
Я перепробовала все способы! Ничего не помогло! Помогите пожалуйста решить эту проблему! Я вас очень прошу!

Здравствуйте!
Пытаюсь у становить мод-пак к игре WOT, и постоянно выбивает Runtime Error (at 233:2657): Could not call proc.
Пробовал и клинэр запускал, не помогло.

Здравствуйте !
Пытаюсь установить мод пак для wot и постоянно вылазит ошибка Runtime error (183:-2)
Что делать, подскажите. Все что было на сайте все сделал, все равно не помогло

Уважаемый МОЛОДОЙ АДМИН… (жаль, что имени своего Вы не указали…). В компьютерных делах я не особо сильна..
После чистки ноутбука столкнулась с проблемой, которую Вы так понятно и доходчиво разъяснили в данной статье…Ошибку устранила(почистила реестры) всё работает в прежнем режиме, причём, я программу не удаляла. Премного Благо Дарю.

А что насчет «rentime eror 200» ? мне не помогло

Источник

Printing error on Co02

I am having trouble printing from the transaction CO02. After we try to print a certain order we receive the error below.

The SAP application had to terminate due to an ABAP runtime error.

The characteristics of the runtime error are:

Transaction ID. xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

What can you do?

Take a note of the runtime characteristics listed above and of the

actions and entries that caused the application to terminate.

For further help in handling the problem, contact your SAP administrator

I have checked the Dump on ST22 and the following dump is :

Category ABAP Programming Error

Runtime Errors OPEN_DATASET_NO_AUTHORITY

ABAP Program xxxxxxxxxxxxxx

Application Component Not Assigned

Date and Time 18.09.2018 15:49:44

No authorization to open the file «xxxxxxxxxxxxxxxxxx.txt».

After i have seen the Dump i have tried to user su53 for the user but it doesnt show nothing.

Using PFCG i have tried to add the authorization object S_DATASET to this user putting the following values for the fields:

Physical file name Assets *

ABAP program name *

When i take out the value 06 delete from Activity the problem still persist meanwhile when it has all them * the problem is resolved.

Can someone please answer why is this possible? Why does the value 06 delete affect printing ? The dump above what kind of values are a must?

If u have any other advice for the problem all is welcomed.

Источник

The sap application had to terminate due to an abap runtime error перевод

Available Monitoring Categories

The available monitoring categories are:

• ABAP Runtime: ABAP short dumps as found in ST22

Available Filter Options

For ABAP Runtime errors, you can collect all ABAP dumps in the managed system. You can also use the following filter parameters, to restrict the data collection:

Exception: Runtime Error (ST22)

Exception (ST22)

For ABAP Runtime errors the following metrics are collected:

• ABAP Runtime exceptions: Indicates that ABAP runtime errors were collected during the last collection
  • Additional filter fields:
    • Process type: Batch, Dialog, HTTP, RFC or Update
    • Source IP Address: IP address of the source server if the runtime error was called by a remote caller
    • Source Server: server name of the source server if the runtime error was called by a remote caller
• Number of ABAP Runtime Errors over period: Number of ABAP Runtime Errors during the alert calculation period
  • Additional filter fields:
    • Process type: Batch, Dialog, HTTP, RFC or Update
    • Source IP Address: IP address of the source server if the runtime error was called by a remote caller
    • Source Server: server name of the source server if the runtime error was called by a remote caller

Источник

Whenever SAP comes across an issue that causes it to stop processing it generates an ABAP Runtime Error. A basic example of this would be a divide by zero but there and many such errors defined in SAP such as DBIF_RSQL_INVALID_REQUEST Invalid Request.

The runtime error would be presented immediately if executing a dialog process but can be recovered any time using transaction ST22. All runtime errors that happen during a background or RFC process are also available via tcode ST22.

The runtime error contains all the details about the type of error as well as the contents of the program variables at the point of the error. for example here is an example of the description you might see for DBIF_RSQL_INVALID_REQUEST.

What Happened? The current ABAP/4 program terminated due to an internal error in the database interface. What can you do? Make a note of the actions and input which caused the error. To resolve the problem contact your system administrator. You can use transaction ST22 (ABAP dump analysis) to view and administer termination messages, especially those beyond their normal deletion date. Error analysis.

In a statement, an invalid request was made to the database interface when accessing the table “EKKO”.

SAP Runtime error transactions and ABAP programs

ST22 –ABAP runtime error
RSLISTDUMPS – List All Runtime Errors and short description
RSSHOWRABAX – Program associated with ST22

SAP Runtime error tables 

SNAP – ABAP/4 Snapshot for Runtime Errors (ST22 list)
SNAPTID – ABAP Runtime Errors – Uses SNAPT as a text table so Includes first text line(TLINE) 
SNAPT – ABAP Runtime Error Texts
SNAPTTREX – Exception table for translation

Runtime Error categories (SNAPTID-CATEGORY)

Field: SNAPTID-CATEGORY
Domain: S380CATEGORY

• I Internal Error
• R Error at ABAP Runtime
• Y Error at Screen Runtime
• D Error in Database Interface
• A ABAP Programming Error
• F Installation Errors
• O Resource Shortage
• E External Error
• U End User Error
• K No Error
• S ST Runtime Error
• J Internal ST Error
• X XSLT Runtime Error& Text Include (no Short Dump, only Text Module)
• & Text Include (no Short Dump, only Text Module)
• B ITS Error
• Q Error in Open SQL
• – Unclassified Error

Most common SAP runtime errors

Below is a list of some of the more common runtime errors including a link to full details of the error and what causes it.

DBIF_RSQL_INVALID_REQUEST

MESSAGE_TYPE_X

TIME_OUT

OPEN_DATASET_NO_AUTHORITY

CONVT_NO_NUMBER

GETWA_NOT_ASSIGNED

TSV_TNEW_PAGE_ALLOC_FAILED

LOAD_PROGRAM_CLASS_MISMATCH

LOAD_PROGRAM_INTF_MISMATCH

Categories of ABAP Runtime Errors

An ABAP program can be terminated during its runtime for a number of different reasons. The database table SNAPTID lists all potential runtime errors (in total, around 1900).

To allow clearer processing, the runtime errors are divided into categories. The category of the runtime error returns hints on cause of the error and troubleshooting.

Internal Kernel Error

Error in ABAP Kernel.

Sending an error message to SAP.

Errors in the ABAP runtime

Errors in the screen runtime

Errors in the database interface

The system was able to roughly determine the area in which the error occurred. Next, clarify whether it was triggered by an internal error or by a programming error.

ABAP programming errors

Errors in the ABAP program, such as a division by zero or a catchable exception that was not caught.

If you are dealing with a non-modified SAP application, send an error message to SAP.

These include, for example, inconsistencies between the kernel and the database.

A typical installation error is the error START_CALL_SICK .

Example: SYSTEM_NO_ROLL : The application does not have enough memory available.

The error was caused by a call outside the system.

The code page of the operating system does not match the SAP system language

An incorrect logon attempt occurred when calling outside the SAP system (for example, RFC SDK).

End user errors

Incorrect printer settings at end user.

The program was not terminated due to an error, but rather due to deliberately performed actions.

If an administrator cancels a running transaction, the runtime error SYSTEM_CANCELED is thrown.

ST runtime errors

The error occurred during a Simple Transformation (ST). The cause is a programming error in the ST program.

Internal ST errors

The error occurred during a Simple Transformation (ST). There is an internal error in the ST VM.

XSLT runtime errors

The error occurred during the execution of an XSLT transformation.

The error occurred in ITS. This is usually an HTMLB error.

Источник

Printing error on Co02

I am having trouble printing from the transaction CO02. After we try to print a certain order we receive the error below.

The SAP application had to terminate due to an ABAP runtime error.

The characteristics of the runtime error are:

Transaction ID. xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

What can you do?

Take a note of the runtime characteristics listed above and of the

actions and entries that caused the application to terminate.

For further help in handling the problem, contact your SAP administrator

I have checked the Dump on ST22 and the following dump is :

Category ABAP Programming Error

Runtime Errors OPEN_DATASET_NO_AUTHORITY

ABAP Program xxxxxxxxxxxxxx

Application Component Not Assigned

Date and Time 18.09.2018 15:49:44

No authorization to open the file «xxxxxxxxxxxxxxxxxx.txt».

After i have seen the Dump i have tried to user su53 for the user but it doesnt show nothing.

Using PFCG i have tried to add the authorization object S_DATASET to this user putting the following values for the fields:

Physical file name Assets *

ABAP program name *

When i take out the value 06 delete from Activity the problem still persist meanwhile when it has all them * the problem is resolved.

Can someone please answer why is this possible? Why does the value 06 delete affect printing ? The dump above what kind of values are a must?

If u have any other advice for the problem all is welcomed.

Источник

Categories of ABAP Runtime Errors

An ABAP program can be terminated during its runtime for a number of different reasons. The database table SNAPTID lists all potential runtime errors (in total, around 1900).

To allow clearer processing, the runtime errors are divided into categories. The category of the runtime error provides hints on the cause of the error and troubleshooting.

Internal Kernel Error

Error in ABAP Kernel.

Sending an error message to SAP.

When doing this, use the application component displayed in the header of the long text (if displayed).

ABAP programming errors

Dynpro programming errors

Simple transformation programming errors

XSLT programming errors

ITS programming errors

Programming errors specific to the program type.

Example: Division by zero or a catchable exception in an ABAP program that is not caught.

If you are dealing with a non-modified SAP application, send an error message to SAP.

When doing this, use the application component displayed in the header of the long text (if displayed).

Installation and administration errors on your ABAP server

These include, for example, inconsistencies between the kernel and the database.

A typical installation error is the error START_CALL_SICK .

This is most probably a local problem in your ABAP system.

Resource bottleneck on your ABAP server

Example: SYSTEM_NO_ROLL : The application does not have enough memory available.

This is most probably a local problem in your ABAP system.

Temporary problem in your ABAP runtime environment

The problem is only temporary.

This is most probably a local problem in your ABAP system.

The program was not terminated due to an error, but rather due to deliberately performed actions.

Example: If an administrator cancels a running transaction, the runtime error SYSTEM_CANCELED is thrown.

Источник

Analyzing ABAP Runtime Errors

Prerequisites

Analysis of dumps in the debugger is not available in SAP NetWeaver Release 7.x systems.

The program that you are running has just aborted because of a run time error and has written an ABAP ‘short dump’.

Context

This section shows you how to display the dump and use it to do a post-mortem analysis of the problem.

See more background information on the SAP Community Network (SCN):

Procedure

1. If an ABAP program that you have started from the ABAP Development Tools fails with a short dump, then the system responds by displaying a dialog like this one:

The dialog appears outside of the ADT window and also automatically fades out. Keep an eye out for the dialog if you are testing a new program.

The program is dead, so you cannot run it at all in the debugger. However, all of the variables and other runtime information in the program context are available for you to look at. See the Debugging ABAP Code for more help.

Results

The dump is displayed in transaction ST22 in the integrated SAP GUI.

• You can use the debugger to inspect a dump only if you have started an ABAP program (executable program, class, . ) from the ABAP Development Tools, and it has aborted with an ABAP dump. Only in this dialog use case – in which you are still connected to the program context – can you view an ABAP dump in the debugger.
• The system notifies you of a short dump even if the dump occurs while you are running ABAP Unit. ABAP Unit catches dumps and reports them as errors rather than terminating. Even so, the system lets you intercept and analyze a dump that occurs during unit testing.

Источник

The sap application had to terminate due to an abap runtime error

Available Monitoring Categories

The available monitoring categories are:

• ABAP Runtime: ABAP short dumps as found in ST22

Available Filter Options

For ABAP Runtime errors, you can collect all ABAP dumps in the managed system. You can also use the following filter parameters, to restrict the data collection:

Exception: Runtime Error (ST22)

Exception (ST22)

For ABAP Runtime errors the following metrics are collected:

• ABAP Runtime exceptions: Indicates that ABAP runtime errors were collected during the last collection
  • Additional filter fields:
    • Process type: Batch, Dialog, HTTP, RFC or Update
    • Source IP Address: IP address of the source server if the runtime error was called by a remote caller
    • Source Server: server name of the source server if the runtime error was called by a remote caller
• Number of ABAP Runtime Errors over period: Number of ABAP Runtime Errors during the alert calculation period
  • Additional filter fields:
    • Process type: Batch, Dialog, HTTP, RFC or Update
    • Source IP Address: IP address of the source server if the runtime error was called by a remote caller
    • Source Server: server name of the source server if the runtime error was called by a remote caller

Источник